Skip to main content
Yaoundé, Cameroon
2 centres at your service École de Police • Nomayos
Open 7 days Public holidays included
Approval N°0291 Since 2020
+237 687 187 516
Appointment & tracking
Appointment & tracking
G3 Control

Your journey

From arrival to result, every step is clear.

A simple, structured process for a reliable and transparent inspection.

01 · Preparation

A smooth inspection starts with good preparation.

Before coming to the centre, make sure you have the required documents and that your vehicle is generally ready.

Gather the required documents
Check the key vehicle items
Choose your centre and time slot

Control points

What G3 actually checks.

Essential checks for your safety and for everyone on the road.

Learn more about the checks

Braking

Essential safety for everyone.

Why? Check the efficiency and balance of the braking system to support safe driving.
How? Measurement of braking forces on a roller brake tester, by wheel and axle.
Equipment used Brake tester.
What it helps assess Efficiency, balance and the overall condition of the braking system.

Inside the centre

Rigour shows in the way the inspection is carried out.

Modern facilities and an experienced team for reliable inspections.

See a real inspection visit

Structured procedures

An organised technical path for each vehicle.

Specialised equipment

Facilities adapted to inspection operations.

Technical staff

A team dedicated to a smooth inspection visit.

Visual checks & measurements

Professional observations supported by instrumented measurements.

Brake tester Suspension tester Side-slip plate Headlamp tester Gas analyser Inspection pit

Before your visit

Prepare only what concerns your vehicle.

Select your vehicle and service to get the documents list and our advice.

Documents to present

  • Vehicle registration card
  • Owner ID document
  • Valid insurance certificate
  • Other documents depending on your situation

Before coming

  • Clean and accessible vehicle
  • Visible identification elements
  • Mandatory equipment in place
  • Check the general condition (tyres, lights, etc.)

After the inspection

Your result clearly shows the next step.

Whatever the observations, G3 Control supports you.

Compliant situation

Your vehicle meets the requirements. You receive your report and authorisation to circulate according to the validity period in force.

Action required

Some points require correction. You are informed of the items to address and the next steps.

Re-inspection

A re-inspection may be required after correcting observed defects. G3 explains the process and applicable deadlines.